Using Team Functions; Activating/Deactivating A Group Call - Siemens HiPath 500 User Manual

Using team functions

Step by Step
Leave group?
Join group?
S
Leave group?
Join group?
102
Using team functions
If configured (consult your service personnel), your tele-
phone is part of a team. The team consists of internal
phones that are able to use certain functions.

Activating/deactivating a group call

Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work)
If configured (consult your service personnel), you be-
long to one or more groups of stations, which can be
reached via hunt group or group call station numbers.
Incoming calls are signaled one after the other (= hunt
group) or simultaneously (= group call) on all phones in
the group, until a group member answers the call.
Each station in the group can still be reached via their
personal station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group.
You are part of a hunt group or call group
:
Open the idle menu
Select and confirm the option shown
or
select and confirm the option shown.
R
or
Press the "Hunt group" key.
You belong to multiple groups
:
Open the idle menu
Select and confirm the option shown
or
select and confirm the option shown.
[1] „Differing display view in a HiPath 4000 environment
(not for HiPath 500)"
page 107!
page 19.
page 19.
Seite 116
[1]
,
[1]
,