Making Calls On Multiple Lines Alternately; Mulap Conference Release - Siemens HiPath 500 User Manual

Making calls in the team/executive/secretary configuration
Step by Step
96

Making calls on multiple lines alternately

Prerequisite: You are conducting a call via one of your
group's trunks. Another trunk key is flashing.
T
Press the flashing trunk key. The first call party is on
hold on the other trunk.
T
Press the trunk key flashing slowly. The second call par-
ty is on hold.
You can switch between lines as often as you wish.
Press the trunk key flashing slowly each time.

MULAP conference release

If configured (consult your service personnel), you can
program a sensor key on your phone with the function
"MULAP Privacy Release"
is "Priv Release".
If you program this key, you do not have to use the
menu to set up a conference. Your team partner only
has to press the flashing trunk key associated with your
trunk on his or her phone to immediately join the con-
ference.
[
You are conducting a call.
S
Press the "Priv Release" key. The LED lights up.
Up to three team members can now join the confer-
ence.
Prerequisite: The trunk on which you are speaking is
configured on the other phone as a trunk key.
T
Press the flashing trunk key.
page 63. The default label