Step by Step
*91=Key assignment
Change key
+=Next layer
Destinations
Repdial key
previous
Exit
Another key
Select the saved procedure by pressing the key.
Procedures with activatable/deactivatable func-
tions are activated with one press of the button
and deactivated with the next.
You can press the procedure key during a call to
automatically send the saved digits as DTMF sig-
nals
saving procedures, see
Configuring repdial keys
You can also program internal and external station num-
bers on the second level. The LED function is not avail-
able for internal station numbers on the second level. To
program the second level, you must program a "Shift"
key
page 63.
See also
N
Open the Program/Service menu
Select and confirm the option shown.
S
Press the key shown.
Confirm.
if nec.
Select and confirm the option shown.
Confirm.
Confirm.
j
Enter the station number.
If you make a mistake:
Select and confirm the option shown. This deletes all
entered digits.
Confirm.
or
Select and confirm the option shown.
Programming the function keys
page 57. For display messages when
page 17.
page 117.
page 22.
67