Making Calls Using System Speed-Dial Numbers; Dialing With Speed-Dial Keys - Siemens HiPath 500 User Manual

Step by Step
*7=Use speed dialing?
*7=Use speed dialing?
*92=Change Speed Dial?
Change?

Making calls using system speed-dial numbers

Prerequisite: You know the system speed-dial num-
bers (consult your service personnel).
N
Press the key shown.
Select and confirm the option shown
j
Enter a three-digit speed-dial number.
if nec. Suffix-dialing
j
If necessary, you can suffix-dial additional digits (for
example, the user's extension) at the end of the saved
station number.
If this feature is configured, a suffix is automatically di-
aled (for example, "0" for the exchange) if no entries are
made within 4 or 5 seconds.

Dialing with speed-dial keys

Prerequisite: You have configured speed-dial keys
page 47.
N
Press the key shown.
Select and confirm the option shown
)
Press the key shown.
j
Press the required speed-dial key.
Configure a speed-dial key
You can program the keys 0 to 9 with
ten frequently used phone numbers.
N
Press the key shown.
Select and confirm the option shown
Confirm.
)
Press the key shown.
j
Press the required speed-dial key. If the key is already in
use, the programmed phone number appears on the
screen.
[1] „Differing display view in a HiPath 4000 environment
(not for HiPath 500)"
Enhanced phone functions
[1]
.
[1]
.
[1]
.
Seite 116
47