Parking A Call - Siemens HiPath 500 User Manual

Step by Step
*56=Park a call?
0
Retrieve call?
0

Parking a call

You can park up to ten calls, either internal, external, or
both. Parked calls can be displayed on and picked up
from another telephone. This feature is useful if you
want to continue a call at another phone.
Prerequisite: You are conducting a call.
N
Press the key shown.
Select and confirm the option shown.
9
...
Enter the number of the park slot (0 - 9) and make a note
of it. If the park slot number you entered is not dis-
played, it is already in use; enter another one.
Retrieving a parked call
Prerequisite: One or more calls have been parked. The
phone is idle.
N
Press the key shown.
Select and confirm the option shown
9
...
Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you can-
not retrieve the call.
If a parked call is not picked up, after a specific pe-
riod of time the call is returned to the telephone
from where it was parked (recall).
[1] „Differing display view in a HiPath 4000 environment
(not for HiPath 500)"
Enhanced phone functions
[1]
.
Seite 116
53