Air Scoops - Buell 2007 LIGHTNING Service Manual

HOME

AIR SCOOPS

RAM AIR SCOOP
Removal
1. See Figure 2-124. On left side of bike, locate ram air
scoop (4).
2. Remove three ram air scoop fasteners (3).
3. Remove ram air scoop (4).
Installation
1. See Figure 2-124. Position ram air scoop (4).
2. Install ram air scoop (4) with three fasteners (3). Tighten
to 12-36 in-lbs (1.4-4 Nm).
ENGINE SHROUD AIR SCOOP
Removal
1. See Figure 2-124. On right side of bike, locate engine
shroud air scoop (6).
2. Remove three engine shroud air scoop fasteners (5).
b01012x2x
6
1. Oil cooler air scoop fastener and washer (2)
2. Oil cooler air scoop
3. Ram air scoop fastener and washer
1
2
5
Figure 2-124. RAM Air Scoop, Engine Shroud, Oil Cooler
3. Remove engine shroud air scoop (6).
Installation
1. See Figure 2-124. Position engine shroud air scoop (6).
2. Install engine shroud air scoop (6) with three fasteners
(5). Tighten to 12-36 in-lbs (1-4 Nm).
OIL COOLER AIR SCOOP
Removal
1. See Figure 2-124. On left side of bike, locate oil cooler
air scoop (2).
2. Remove two oil cooler air scoop fasteners (1).
3. Remove oil cooler air scoop (2).
Installation
1. See Figure 2-124. Position oil cooler air scoop (2).
2. Apply LOCTITE 271 (red) to oil cooler air scoop fasten-
ers (1) and tighten to 48-72 in-lbs (5.4-8 Nm).
3
4. Ram air scoop
5. Engine scoop fastener and washer (3)
6. Engine scoop
2007 Buell Lightning: Chassis
2.39
4
2-93