Receiving A Call - Tait TM8250 Operator's Manual

Receiving a call

When you receive a call, your radio displays
the caller's identity and responds in one of
two ways, depending on the way it was
programmed and the way your
network operates.
■
■
Once the
follows:
1
2
3
4
On-air call setup: The radio gives a ring and automatically
accepts the call. The
Full off-air call setup (FOACSU): When a call is received, the
radio rings like a telephone.
To accept the call, press Answer. The radio gives a beep and
the symbol appears in the display. You may also be able
to accept the call if you briefly press the PTT key or lift the
microphone off the microphone clip.
symbol appears, you can proceed with the call, as
Hold the microphone about 5cm (2 inches) from
your mouth.
Press and hold the PTT key to transmit.
Speak clearly into the microphone and release the PTT key
when you have finished talking.
While you are transmitting, the red LED
glows and appears in the display.
End the call by placing your microphone
back onto its hook or by pressing Clear. The network may
also end the call if neither you nor the other party transmits
for a predetermined time or if your call time limit is exceeded.
symbol appears in the display.
Operating in MPT trunked mode 93