Tait TM8250 Operator's Manual page 44

Selecting a group by using the Main menu
1
2
3
Selecting a group by using your Quick
Access menu
Note: Your scroll keys may be programmed for channel scroll.
1
2
3
44 Operating in conventional mode
Select Menu>Channels.
In the Channels menu, scroll through
the list of channels and groups until the
group you want appears.
Press Done.
The programmed group is now shown
in the display, the amber LED glows and
the scanning symbol
the display.
If this is the case, press the scroll key to immediately
begin scrolling through your list of channels and groups.
Press one of the scroll keys
open the Channels menu.
Alternatively, the left selection key may
be programmed as your Quick Access
menu. In this case, press the left
selection key
the Channels menu.
Scroll through the list of channels and
groups until the group you
want appears.
Press Done.
The programmed group is now shown
in the display, the amber LED glows and
the scanning symbol
the display.
appears in
or
to access
appears in
to