Changing Group Membership - Tait TM8250 Operator's Manual

Changing group membership

There are two methods of changing your membership of
talkgroups or scan groups. You may be able to either:
■
■
Selecting a new group using your Quick
Access menu
You may be able to use your Quick Access menu to select a
new talkgroup or scan group. Selecting a new group means
that the previously selected group is automatically deselected.
To select a talkgroup or scan group:
1
2
3
Note: It is not possible to make a call to a scan group, but you
use you Quick Access menu to join a single talkgroup or
scan group, or
use the Main menu to change your membership of
multiple groups.
Press the left selection key
the Groups menu.
The currently selected talkgroup or scan
group has + beside it.
Scroll through the list of groups, until
the talkgroup or scan group you want to
select appears.
Press Join or wait for three seconds.
The previous group is deselected and the
new talkgroup ID may appear in
the display.
To make a call to the talkgroup shown, you may be able to
briefly press the PTT key.
can call any of its constituent groups.
to enter
Operating in MPT trunked mode 87
234
Talkgroup
994
Talkgrp Menu
Groups
992
Scan1 +
Back Join
234
Talkgroup
992
Talkgrp Menu