Tait TM8250 Operator's Manual page 68

Symbols and messages that may appear when
changing group details
The following symbols may appear when viewing group
membership details, adding or deleting channels from a
group, or changing a group's transmit or priority channels.
Symbol
The following messages may appear when using nuisance
delete to temporarily delete a channel from a group, when
adding or deleting channels from a group, or changing a
group's transmit or priority channels.
Message
Scanning not
on
No channel
captured
Not enough
channels in
group
68 Operating in conventional mode
Meaning
This channel is used to transmit on when
there has been no recent activity. You cannot
delete this channel (it will not appear under
Delete channel).
This channel is the group's first priority
channel. You cannot delete this channel (it
will not appear under Delete channel).
This channel is the group's second priority
channel. You cannot delete this channel (it
will not appear under Delete channel).
There is more than one instance of this
channel in the group (the channel will be
scanned more often). If you delete this
channel, the radio will attempt to delete all
instances of the channel.
Meaning
You cannot use nuisance delete to
temporarily delete a channel from a group, as
there is no group currently selected.
You cannot use nuisance delete to
temporarily delete a channel from the group,
as there is no channel currently captured (the
amber LED is glowing and not flashing).
You cannot use nuisance delete to
temporarily delete the channel from the
group, as the captured channel is the last
remaining group member.