Tait TM8250 Operator's Manual page 42

Selecting a channel by using the Main menu
1
2
3
Selecting a channel by using your Quick
Access menu
Note: Your scroll keys may be programmed for channel scroll.
1
2
3
42 Operating in conventional mode
Select Menu>Channels.
In the Channels menu, scroll through
the list of channels until the channel you
want appears.
Press Done.
The programmed channel is now shown
in the display.
If this is the case, press the scroll key to immediately
begin scrolling through your list of channels.
Press one of the scroll keys
open the Channels menu.
Alternatively, the left selection key may
be programmed as your Quick Access
menu. In this case, press the left
selection key
the Channels menu.
Scroll through the list of channels until
the channel you want appears.
Press Done.
The programmed channel is now shown
in the display.
or
to access
to