Tait TM8250 Operator's Manual page 64

Changing the background scan group assigned
to a function key
You can change the background scan group assigned to the
function key programmed for group scanning or for
scanning/nuisance delete.
1
2
3
Suspending a channel from a scanning group
If a member channel of a scan group is busy for a long time
and you do not wish to hear the conversation, you may be
able to use the function key programmed for nuisance delete
to temporarily delete it from the scan group.
When the scan group is next selected, or after the radio has
been turned off and then on, the deleted channel is again
part of the scan group.
Alternatively, the function key programmed for scanning may
be programmed so that:
■
■
Press and hold the function key programmed for scanning to
remove the current channel from the scanning group.
If the operation has been successful, the
message Channel deleted from group
appears in the display.
64 Operating in conventional mode
Select Menu>Advanced>Set scan key.
In the Set Scan Key menu, scroll through
the list of background scan groups until
the group you want appears.
Press Select.
The message Scan key scans new group
appears in the display.
The next time you activate background
scan, the new group will be your
background scan group.
a short key press turns on scanning, and
a long key press activates nuisance delete.
Advanced
Set scan key
Program groups
Back Select
Set scan key
Group1
Group2
Back Select
Scan key
scans
new group