Selecting A Zone - Tait TM8250 Operator's Manual

Selecting a zone

A zone is a collection of channels and groups. When you
select a zone, only the channels and groups assigned to that
zone are available. To select a zone you may be able to either:
■
■
Selecting a zone by using the Main menu
1
2
3
Selecting a zone by using your Quick Access menu
Note: Your scroll keys may be programmed for zone scroll. If
1
2
3
4
40 Operating in conventional mode
use the Main menu, or
use your Quick Access menu.
Select Menu>Zones.
In the Zones menu, scroll through the
list of zones until the one you
want appears.
Press Select.
The zone indication may be
programmed to appear either below the
channel information or beside the
RSSI symbol.
this is the case, press the scroll key to immediately begin
scrolling through your list of zones.
Press one of the scroll keys
Zones menu.
Alternatively, the left selection key may be programmed as
your Quick Access menu. In this case, press the left
selection key
Scroll through the list of zones until the
zone you want appears.
Press Select.
The zone indication may be
programmed to appear either below the
channel information or beside the
RSSI symbol.
or
to access the Zones menu.
to open the