Table of Contents
Advertisement
IPsec Data Encryption (DocuPrint C1110 only)
IPsec (Security Architecture for Internet Protocol) is a suite of protocols that provide
authentication using IKE, and encryption of each IP packet in order to ensure tamper-proof
and confidential communications.
This feature is not supported on the model available in China.
If the network expansion card (optional) is installed, enabling IPsec allows you to encrypt IP
communications. This can prevent third parties from seeing and tampering data via
communication path, even for applications that do not support encryption.
To Enable IPsec
The following explains how to configure various settings required to enable IPsec on
CentreWare Internet Services. For more information, refer to the online help provided for
CentreWare Internet Services.
1.
Launch your web browser and access CentreWare Internet Services.
Note
• For information on how to access CentreWare Internet Services, refer to "Configuring the Printer Using
CentreWare Internet Services" (P. 26).
2.
Click the [Properties] tab.
3.
From the menu displayed on the left, click [IPsec] under [Security].
The [IPsec] page is displayed.
4.
For [Protocol], select the [Enabled] check box.
5.
For [Shared Key], enter the shared key, and for [Verify Shared Key], re-enter the
same shared key for verification.
6.
For [IKE SA Life Time], specify the IKE SA lifetime.
7.
For [IPSec SA Life Time], specify the IPSec lifetime.
153
7.7 Security Features
Advertisement
Table of Contents
