Table of Contents
Advertisement
Item
Job Time-out
Auto Job History
Print ID
Print Text
RAM Disk
Substitute Tray
Sets the amount of time the printer waits for a print job. If a time-out occurs during data
reception, the printer stops the reception and prints the data that has been received.
• [5 Seconds] to [300 Seconds] (default: [30 Seconds])
Specify the time-out value in 1 second increments.
• [Off]
Disables the job time-out.
Sets whether to automatically print a report on the completed print jobs ([Job
History Report]).
• [Off] (default)
Does not automatically print the [Job History Report].
• [On]
Automatically prints the [Job History Report] when the number of print jobs processed
reaches 20.
Note
• You cannot set this during printing.
• You can print the [Job History Report] from the [Report / List] menu.
• You need to restart the printer to activate the new settings. After making the settings,
switch the printer off and then on again.
Prints a user ID on the specified location.
• [Off] (default)
Does not print a user ID.
• [Top Left]
Prints a user ID on the top left corner of paper.
• [Top Right]
Prints a user ID on the top right corner of paper.
• [Bottom Left]
Prints a user ID on the bottom left corner of paper.
• [Bottom Right]
Prints a user ID on the bottom left corner of paper.
Sets whether the printer outputs PDL data, which is not supported by the printer, as text
when the printer receives it. Text data is printed on A4 or Letter size paper.
• [Off] (default)
Does not print the received data.
• [On]
Prints the received data as text data.
Allocates memory to the RAM Disk file system for the Secure Print/Sample Print
feature.
• [On]
Allocates memory for using the Secure Print/Sample Print feature.
• [Off] (default)
Does not allocate memory for using the Secure Print/Sample Print feature.
Note
• [RAM Disk] appears only when additional memory (optional) is installed.
Sets whether to print on paper loaded in another tray when there is no paper left in the
tray selected by the auto tray selection feature.
• [Off] (default)
Select this not to replace paper but display a message prompting you to load paper.
• [Larger Size]
Select this to replace the paper with a larger size paper before printing in 100%
magnification ratio.
• [Closest Size]
Select this to replace the paper with the nearest size paper before printing in 100%
magnification ratio.
Note
• These settings will be overridden by requests sent from computers.
Description
5.2 Description of Menu Items
91
Advertisement
Table of Contents
