Description Of The Device - Beamz DMX1360 Instruction Manual

1. Description of the device

1.1 Features
The DMX1360 Controller
• Hybrid console for 16 DMX units (8 intelligent fixtures & 8 PARs)
• 6 freely programmable PAR programs, ONE/MIX/SEQ available
• 8 freely programmable fixture programs, MIX/SEQUENCE available
• 136 DMX channels(8 channels for PARs and up to 16 channels per fixture)
• 96 freely programmable fixture scenes / PAR scenes
• Speed, Fade Time and Master control for chases
• Joystick for Pan / Tilt & Pan fine / Tilt fine movement of fixture
• Free access of CF card (32MB) for the exchange of data and memories
• Blackout overall output
• Fade time/Non-fade time under control
• Power failure memory and Fog Machine trigger
• MIDI control over scenes, chases and blackout
• Audio input and built-in microphone for music sync. function
Scanner section (A):
•
Up to 8 scanners with max. 16 addresses
•
Memory for 96 scanner scenes
•
Memory for 8 scanner chases with 99 steps
•
Programmable speed and fade time
•
Tap-sync.
•
Black-out
•
Patch possibility
•
Joystick with fine mode and 4 step buttons
Parcan section (B):
•
8 Channel dimfaders with 1 master fader
•
Memory for 96 parcan scenes
•
Memory for 6 parcan chaser with 99 steps
•
One/mix/sequence options for 16x 6 runlights
•
Speed fader
•
Audio sensivity fader
•
Step function
•
Tap-sync function
•
Standby and full-on
•
Fade / speed
•
Light to sound
NOTE: Knowledge of MIDI and DMX is required to fully utilize this unit.
is a light controller from Beamz.