Related Manuals for Beamz DMX1360
Summary of Contents for Beamz DMX1360
- Page 1 DMX1360 Controller 136CH 154.044 INSTRUCTION MANUAL GEBRUIKSAANWIJZING BEDIENUNGSANLEITUNG...
- Page 2 ENGLISH Congratulations to the purchase of this Beamz light effect. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features. Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock.
- Page 3 NEDERLANDS Hartelijk dank voor de aanschaf van dit Beamz lichteffect. Neemt U a.u.b. een paar momenten de tijd om deze handleiding zorgvuldig te lezen, aangezien wij graag willen dat u onze producten snel en volledig gebruikt. Lees deze handleiding eerst door alvorens het product te gebruiken. Volg de instructies op anders zou de garantie wel eens kunnen vervallen.
- Page 4 DEUTSCH Vielen Dank für den Kauf dieses Beamz gerat. Nehmen Sie sich einen Augenblick Zeit, um diese Anleitung sorgfältig durchzulesen, damit sie die Möglichkeiten, die unser Produkt bietet, sofort voll ausnutzen können. Lesen Sie erst die Anleitung vollständig vor der ersten Inbetriebnahme durch. Befolgen Sie die Anweisung, da sonst jeglicher Garantieanspruch verfällt.
- Page 5 ESPAÑOL Enhorabuena por la compra de este efecto de luces Beamz. Por favor lea atentamente este manual antes de usar el aparato para disfrutar al completo de sus prestaciones. Seguir las instrucciones le permite no invalidar la garantía. Tome todas las precauciones para evitar que se produzca fuego o una descarga eléctrica.
-
Page 6: Specification
Specification Voltage: ................AC 240V～ 50/60HZ / 120 AC 120V-60HZ Power input: ......................DC9～15V 600mA DMX Output: ........................XLR 3 pins Channels: ............................. 136 Dimensions : ......................482x178x80mm Weight : ............................ 3,6Kg... -
Page 7: Description Of The Device
1. Description of the device 1.1 Features DMX1360 Controller is a light controller from Beamz. • Hybrid console for 16 DMX units (8 intelligent fixtures & 8 PARs) • 6 freely programmable PAR programs, ONE/MIX/SEQ available • 8 freely programmable fixture programs, MIX/SEQUENCE available •... - Page 8 1.2 Overview Fig. 1 1.3 Frontside Fig. 2 1) SCENE buttons Press the scene buttons to load or store relevant Scenes. 2) CHASE buttons These buttons are used to load or store relevant Chases. 3) FIXTURE buttons To select fixtures for setting, programming or recording. 4) Dimmer faders To control and adjust relevant dimming level for each channel.
- Page 9 9) AUDIO button Used to activate audio sync of chase rate or set a scene at audio effect. 10) BLACKOUT button Press this button to enable or disable relevant DMX output. When its LED is lit, that means relevant DMX output is disabled. Press this button again the LED will be “off”, that means the DMX output is reactivated.
- Page 10 32) PAGE button To select relevant Scene-page or Chase-page. 33) STEP button 34) TAP SYNC button Repeatedly tap this button to establish different chase rate. 35) STANDBY button Press this button to enable or disable relevant output of PARs. Its function is similar to the BLACKOUT button.
- Page 11 1.3 Backside Fig. 3 43) CF CARD socket It is for CF CARD operation. 44) FOG MACHINE INPUT To connect with the fog machine. 45) MIDI IN Used to receive MIDI data. 46) DMX OUT To send DMX data. 47) DMX polarity select Used to select DMX polarity (2-,3+ / 2+,3-).
-
Page 12: Installation
DOWN button (18), until you see the address you want. By pressing the UP button (17), you can change the Channel of your DMX1360 Controller. To save a channel patch, you first have to select a fixture (3) and then press RECORD (15). Make sure all channels are only used once. - Page 13 PAN>NONE OK ESC SEL ADJ The joystick of the DMX1360 Controller is not standard included in the patch, that’s why the word “NONE” is shown on the spot of the DMX address in the display. You can change the address by using the DOWN button (18). Press the button, until the display shows the right DMX address.
- Page 14 The speed can also be changed during a Live Mode “chase”’. Hold down the particular “chase” button of which you want to change the speed manually and at the same time press the mix/sequence button (6). The blinking speed of the LED (above the chase button) changes. If the LED blinks slowly, the pre-programmed “speed”...
-
Page 15: Mix Mode
The DMX channels for conventional light start at address 129, because all prior addresses are reserved for moving light effects. To keep programming and controlling simple, this DMX1360 Controller has been divided in 2 parts. The left side is for moving light effects and the right side is for conventional light. - Page 16 Stand-by (35) With this function the DMX1360 Controller is set to a stand-by mode. The programs keep on running, but DMX output for conventional light is off. This function is almost the same as the “blackout” function for moving light effects.
- Page 17 Fade + speed (36) With this function you can set the way the steps follow each other. When using a “fade”, the set time on the “speed”-fader (39) will be the fading time between 2 steps. When using a “speed”, the set time on the “speed”-fader will be the waiting time between 2 steps.
- Page 18 CF-CARD The CF-Card is a back-up option. You can put programs on the CF-card or backup programs, and they can be reinstated later. Store Data With the UP/DOWN buttons (17 & 18) you have to choose “CF CARD” (option 1) in the set up menu and then press the “record”...
-
Page 19: Pan / Tilt Fade Only
Select relevant location (1-99) by UP/DOWN buttons (17 & 18), and press the RECORD button (15) for data reading, use ESC (16) to cancel or exit. Patch channel (assign) Enter the setting mode to choose “2. ASSIGN CH.” and press RECORD (15) to enter channel distributing mode. -
Page 20: Note Number
Turn off the power when connect or disconnect CF card with the unit. CF card (32MB) can be used only for DMX1360 Controller; otherwise the data would probably be missing. Outputting of DMX would be stopped during the reading or storing to CF card. And so does to “ASSIGN CH.”... -
Page 21: Maintenance
5. Removing the rubber housing for 19” rack fitting Remove the 4 screws (A, B, C, D) on the side and the 4 screws (E, F, G, H) on the top and bottom. Now you can mount your DMX1360 Controller in a 19” rack. 6. Maintenance Beamz DMX1360 Controller requires almost no maintenance. - Page 22 0031546589299 Fax : 0031546589298 The Netherlands Product number: 154.044 Product Description: DMX1360 Controller 136CH Regulatory Requirement: EN 60598-1/-2 EN 60335-1 EN 55014-1/-2 EN 61000-3 The product meets the requirements stated in Directives 2006/95 and 2004/108/EC and conforms to the above mentioned Declarations.
- Page 23 This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service.
- Page 24 www.tronios.com Copyright © 2013 by TRONIOS the Netherlands...