Beamz DMX1360 Instruction Manual page 14

Controller 136ch
Table of Contents

Advertisement

The speed can also be changed during a Live Mode "chase"'. Hold down the particular "chase" button of
which you want to change the speed manually and at the same time press the mix/sequence button (6).
The blinking speed of the LED (above the chase button) changes. If the LED blinks slowly, the
pre-programmed "speed" will be held. If the LED blinks fast, the "speed" and "fade" can be set by using
the faders (4).
Erase a Chase or Scene
Hold down the RECORD button (15) for 5 seconds, and the green LED will illuminate.
The LCD now shows:
SELECT A SCENE OR CHASE! PAGE01
- Press the SCENE button you want to delete. Hold down the SCENE button and at the same time press
the DEL button (13). Then press the ESC button (16) to exit the menu. You will see that the LED, which
was previously on (next to the SCENE), now is off. This means the SCENE has been deleted.
- Press the button CHASE you want to delete. Hold down the CHASE button and at the same time press
the DEL button (13). Then press the ESC button (16) to exit the menu. Now the CHASE has been
deleted.
Exit Record
Press the ESC button (16) when all steps have been entered, then press the button again to exit the
menu.
Play Scene / Chase
The LEDs of the pre-programmed "scenes" illuminate green. The "scenes" of which the LEDs are off, are
not programmed. Press the button of a "scene" or "chase" you want, to activate it. Press the button again
to deactivate. The LEDs from the "chase" only blink after the chase has been activated/selected. Chases
that haven't been programmed can't be selected.
Page (5)
When the PAGE button (5) has been activated, you can view the pages of the moving light effects.
CH.PAGE button (19)
Press this button to switch between CH 1-8 and CH 9-16. LED "off " means 1-8 channels available, while
LED "on " means 9-16 channels available.
Tap sync (8)
With this function you can press the "chase" speed manually. The speed, with which you press the button,
is the speed of the "chase". This option is often used, when the "chase" has to follow the rhythm of the
music.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

154.044

Table of Contents