Thank you for purchasing one of our products. Before you use this product please read these instructions carefully to enjoy optimal performance and a longer service life. CONTENS Contens ..............................3 Unpacking Inspections ..........................3 Safety Instructions ........................... 4 ...
SAFETY INSTRUCTIONS Always connect this product to a grounded circuit to avoid the risk of electrocution. Never put tiny metal objects such as a screwdriver, iron wire, etc. into this product in case of a short circuit . ...
MAINTENANCE The unit should be cleaned periodically to ensure the optimal performance, smudginess can decrease the life of the light source and the output of light is affected by the dust which can make the machine overheat. It is advised to perform maintenance 2 times a month. Be sure to disconnect the unit from the power socket before cleaning.
System menu Aut1 Auto Speed 1 - 9 Aut2 U 0 - 255 Sp 0 - 20 Stat R 0 - 255 G 0 - 255 B 0 - 255 Shows version R 0 - 255 G 0 - 255 B 0 - 255 On/Off On/Off...
Auto mode This menu will let you select the desired auto mode. Press MENU, press the UP or DOWN button until “Auto” is displayed, press ENTER. There are 3 auto modes, press the UP or DOWN button to select the desired mode, press ENTER to confirm.
Slave mode In this mode the unit functions as a slave Press MENU, press the UP or DOWN button until “Slav” is displayed, press ENTER. “Sla” will now be displayed, Slave mode is confirmed. The unit will now act as a slave in Auto, sound and chase mode.
DMX CHANNELS: Mode Channel Desciption Saturation Value (Brightness) Red (0~255) Green (0~255) Blue (0~255) White (0~255) Dimming (0~255) Red (0~255) 5 CH Green (0~255) Blue (0~255) White (0~255) Dimming (0~255) Red (0~255) Green (0~255) 6 CH Blue (0~255) White (0~255) Strobe, (0~9 Full on, 10~255 strobe) Dimming (0~255) Red (0~255)
Page 11
Fax : 0031546589298 The Netherlands Product number: 151.244 Product Description: LED PAR 4x 8W Quad Linkable Regulatory Requirement: EN 60598-1/-2-17 EN 55015 EN 61547 EN 61000-3-2/-3-3 The product conforms to the essential requirements and other relevant previsions of the R&TTE Directive (1999/5/EC).