Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Beamz LCB-384
Summary of Contents for Beamz LCB-384
- Page 1 Ref. Nr. 150.560 LED COLORLINE BAR LCB-384 MANUAL ...
-
Page 2: Table Of Contents
Thank you for purchasing our company products. Please read these instructions carefully to enjoy optimum performance and a longer service life before you start to use. CONTENTS CONTENTS ............................... 2 Unpacking Inspections .......................... 3 Unpacking instructions ........................ 3 Checking the contents of the carton: .................... 3 Safety Instructions ........................... 3 Product Overview ............................ 4 Functions Introductions .......................... 4 ... -
Page 3: Unpacking Inspections
UNPACKING INSPECTIONS Unpacking instructions Please unpack the carton and check the goods carefully when you receive it , if discover packing damage, shortage or quality problem, please notify the shipper and reject the goods. Before using this product, please read the instructions carefully and keep it in a safe place for future reference. -
Page 4: Product Overview
PRODUCT OVERVIEW 1. Power Input 9. Safety Eyebolt 2. Power Output 10. Four-pin Connector 3. DMX signal input 11. Master/Slave signal output 4. DMX signal output 12. LEDs 5. Control panel 13. Back Cover 6. Six-pin Connetor Mounting Bracket 7. Sound Sensitivity Adjustment 8. -
Page 5: Set Parameter In The Action Mode
POWER OUT POWER IN Maximum connecting machines are 15 units with the same model Set parameter in the Action Mode 1. Power on until it resets ok and press Up or Down to display Act. 2. Press Enter and then press UP or Down to choose which kind of action mode you need. 3. -
Page 6: Functions For Action Mode And System Setup Mode
Functions for Action mode and system setup mode： MODE FUNC PROGRAM FUNTION/PROGRAM (P)RUN SPEED (F) FLASH SPEED (C) COLOR Blackout 000 – 100 Green 000 – 100 Blue 000 – 100 Yellow 000 – 100 Purple 000 – 100 Cyan 000 –... -
Page 7: Master/Slave Mode
Master/Slave mode Connect the LCB-384 as below picture and power on all the connecting products. Control panel of master displays current saved mode and slave displays L005.L009.L013.Number of products connected can be shown on the slave control panel, slaves follow the actions of master. - Page 8 No.2 No.1 No.3 No. .. No.2 No.1 No.3 No. .. No.2 No.1 Operation Instructions for DMX512： In the mode of System setup, press Up or Down, and then choose “SDAD”to set up DMX value. The channels for LCB-384： ‐ 8 ‐ ...
-
Page 9: Sequential Color Chase
（0-23） Mode （0-100%） Run Speed Strobe Speed （0-100%） （0-100%） Color DMX Value Functions CHANNEL VALUE FUNCTION CH 2 CH 3 CH 4 Static colors Flash 000 – 009 Blackout speed 010 – 019 000 – 249 020 – 029 Green 030 –... -
Page 10: Maintenance
MAINTENANCE The unit should be cleaned periodically to ensure the optimum performance, the smudginess can decrease the life of light and the output of light is affected by the dust which can make the machine overheating. In general, make the maintenance at least two times a month. Be sure to power off the unit before cleaning . -
Page 11: Ce & R&Tte Declaration Of Conformity
Tel : 0031546589299 Fax : 0031546589298 The Netherlands Product number: 150.560 Product Description: Beamz, LCB-384 LED Colorline 1m DMX Regulatory Requirement: EN 60598-1/-2-17:2009 EN 62031:2008 EN 61347-2-13:2007 EN 55015:2006/A2:2009 EN61547:2009 EN 61000-3-2/-3-3 The product meets the requirements stated in the above mentioned Standards. This certificate does not cover the aspects that may be relevant such as performance and fitness for purpose. - Page 12 Specifications and design are subject to change without prior notice.. www.tronios.com Copyright © 2013 by TRONIOS the Netherlands ...