Table of Contents
Advertisement
Chapter 1 — Getting Started
• Double-click on the mdac_typ.exe.
• The application will extract files, then ask you to read a license agreement.
After reading the agreement, check the "Accept License Agreement"
checkbox. Click Next.
• If you are asked to restart, allow the system to reboot before continuing.
2. The Autorun setup screen (Figure 1-1) should appear after the system restart.
If it does not, use Windows Explorer to select and run setup.exe from the CD-
ROM or click Start > Run.
3. From the Autorun setup screen, select Install "CineCast," then follow the
steps listed below:
• Read the Welcome screen (Figure 1-3), then click Next.
• On the "Choose Destination Location" screen (Figure 1-4), accept the
Program Files\ Vela Research
Do not change the destination! The default destination is required for
proper decoder operation.
4. On the "Select Components" screen (Figure 1-5):
• If you have not yet run the MFC update option for this release, check the
"MFC Update" checkbox on the "Select Components" screen. This step
needs to be done only once. If you check this box, there will be an extra set
of steps automatically included in the procedure specified below— and the
installation procedure will require an additional system restart. Just follow
the instructions presented by the MFCupdate.exe installation application.
• Under Required Components on the "Select Components" screen, check the
"Core Decoder Modules" checkbox.
• Click Next to proceed with the installation of the selected components.
• On the "Select Program Manager Group" screen (Figure 1-6), accept Vela
Research by clicking Next.
• On the "Start Installation" screen (Figure 1-7), click Next.
• A "DO NOT REMOVE THE CD" message box will display as a reminder
that a number of reboots may be required during the installation process.
Click OK to continue.
• If you have chosen to run the MFC Update option, the installation process
will begin here to copy files. Note: If you have not already done so, you
must run the "MFC Update" and "Core Decoder Modules" under Required
destination, as listed, by clicking Next.
35
C:\
Software Installation
Advertisement
Table of Contents
