Table of Contents
Advertisement
122
BUSY SCSI Status may be returned if decoder has not entirely finished executing
the last decoder command. (Retry command.)
When genlock is enabled [via
and the genlock request is not present (bit 15 of command = 0):
SCSI Status
Sense Key
Additional Sense Code and Qualifier
Additional Sense Bytes (bytes 18 & 19) will be set to 0107h. The MPEG PLAY
command in this genlock mode is not executed.
When "Soft Error Mode" and genlock is not present at Play command, the follow-
ing error is returned (bit 15 of command = 1): "Recovered error, genlock sync lost."
SCSI Status
Sense Key
Additional Sense Code and Qualifier
Additional Sense Bytes 18 & 19
WRITE BUFFER
"Illegal request, invalid field within CDB." A reserved or specific field contains
invalid data.
SCSI Status
Sense Key
Additional Sense Code and Qualifier
"Illegal request, logical block address out of range." Address or transfer length is
outside the range of the microcode memory (currently 256K).
SCSI Status
Sense Key
Additional Sense Code and Qualifier
SCSI Command Error Conditions
CineCast Quad Pro Version 2.6 Installation and User Manual
DECODER
(45h) command, command code 0016h],
Check Condition
05h
6100h
Check Condition
01H
6100h
0107h
Check Condition
5h
2400h
Check Condition
5h
2100h
Advertisement
Table of Contents
