Table of Contents
Advertisement
Chapter 2 — Overview and Operation
111
After the download is complete, the power must be cycled to restart decoder
operation with the new microcode. Alternatively, a SCSI Reset or Bus Device
Reset can be issued.
NOTES: (1) The MPEG FIFO buffer area is used during this command. No
(6)
WRITE
or
(10) commands can be used during a microcode download sequence. (2)
WRITE
Power should not be cycled during execution of the download sequence. An inopera-
tive condition may result requiring a special cable to recover microcode.
WRITE BUFFER
Advertisement
Table of Contents
