Table of Contents
Advertisement
Chapter 2 — Overview and Operation
Step
Note
12
• Playback End on LUN
0 (Clip 1) triggers
inline events A & B.
• Clip 2 Playback starts
on LUN 1.
• Video/Audio switch to
LUN 1 outputs.
13
14
15
16
17
18
LUN 0
• Clip 1 Ends
• Pre-load data for clip 3.
• Issue MPEG Play Com-
mand with Pause on First
Frame set.
• Pre-black set to starting
frame number.
• Send Resume 0x0012 with
"inline execution on Adjacent
Channel Playback End."
Event C
• Audio/Video Channel Select
0x003C "inline execution
on Adjacent Channel Play-
back End."
• Primary = source 0 (LUN 0
output).
• Secondary = source 0 (LUN
0 output).
• Video Switch = 10b (LUN 0
output).
•
• Cmd = 0x003C
• Data = 0x00000080
Event D
• Monitor Mode Page 0x30
wait for PLAY bit set.
LUN 1
• Mode Page 0x30 PLAY bit
will be set and data will start
being consumed.
• Start sending data for clip 2.
• Continue sending data for
clip 2.
• Continue sending data for
clip 2.
• Continue sending data for
clip 2.
• Continue sending data for
clip 2.
• Last block of data for Clip 2.
Two-channel Playback Example
141
Advertisement
Table of Contents
