Vela CineCast 2000-0422 Installation And User Manual page 34

Quad pro mpeg-2 four-channel serial digital interface (sdi) a/v decoder system for broadcasters
Table of Contents

Advertisement

20
screen will appear (Figure 1-1).
• From the Autorun screen, select the "Explore This CD" option. A screen
similar to that in Figure 1-2 will appear.
• Double-click on the System folder.
• Double-click on the "NT Service Pack" folder.
• Double-click on the sp6i386.exe file.
• The application will extract files, then ask you to read a license agreement.
After reading the agreement, check the "Accept License Agreement"
checkbox as well as the "Backup Files Required to Uninstall" checkbox.
• Click Install.
• Click Next, OK, or Finished to all of the screens that follow.
• If you are asked to reboot, allow the system to restart before continuing.
3. The Autorun setup screen (Figure 1-1) should appear after the reboot. If it
does not, use Windows Explorer to select and run setup.exe from the CD-ROM.
4. Install Internet Explorer version 5, Service Pack 4 or later, if it's not already
installed on your system. Again, you can download this from the Internet, or
you can install it from the Vela system software installation CD-ROM. To use
the CD-ROM, follow these steps:
• Insert the CD-ROM disc into the CD-ROM drive.
• When the setup screen appears, select the "Explore This CD" option.
• Double-click on the "System" folder.
• Double-click on the "MSIE5 NT" folder.
• Double-click on the setup.exe icon. When a window pops up to select
"Typical" or "Minimal" Installation, select "Minimal."
• On the next screen, deselect (remove the checks from) the "Windows Media
Player" and "Outlook Express" selections.
• The version of Windows Media Player included with Internet Explorer 5.0 is
outdated. A more recent version is included on this CD, though the installa-
tion of Windows Media Player and Outlook Express are not a requirement
for the CineCast Quad Pro.
• Click Next, OK, or Finished to all of the screens that follow.
• If you are asked to reboot, allow the system to restart before continuing.
5. The setup screen should appear after the reboot. If it does not, use Windows
Software Installation
CineCast Quad Pro Version 2.6 Installation and User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cinecast 2000-0422-1Cinecast 2000-0422-2

Table of Contents