Before Calling Your After Sales Service - Koncar HC1A 60 386E.IM User Manual

BEFORE CALLING YOUR AFTER SALES SERVICE

LOPO
If your fridge is not operating;
• Is there a power failure?
• Is the plug connected to the socket correctly?
• Is the fuse of the socket to which the plug is connected or the main
fuse blown?
• Is there any failure at the socket? To check this, plug your refrigerator
to a socket this is surely operating.
If your fridge is not cooling enough;
• Is the temperature adjustment right?
• Is the door of your fridge opened frequently and left open for a long
while?
• Is the door of fridge closed properly?
• Did you put a dish or food on your fridge so that it contacts the rear
wall of your fridge so as to prevent the air circulation?
• Is your fridge filled excessively?
• Is there adequate distance between your fridge and the rear and side
walls?
• Is the ambient temperature within the range of values specified in the
operating manual?
If the food in your refrigerator compartment is over cooled
• Is the temperature adjustment right?
• Are there many food recently put inside the freezer compartment?
If so, your fridge may over cool the food inside the refrigerator
compartment as it will operate longer to cool these food.
If your fridge is operating too loudly;
To maintain the set cooling level, compressor may be activated from
time to time. Noises from your fridge at this time are normal and due to
its function. When the required cooling level is reached, noises will be
decreased automatically. If the noises persist;
• Is your appliance stable? Are the legs adjusted?
"Low voltage
Warning"
When the power
supply gets lower
than 170 V the
appliance gets to
steady position.
This not a failure. This
prevents any damages
on the compressor. This
warning will off after the
voltage gets required level
EN
65