Connecting A Ptz Camera; Controlling A Ptz Camera (Local Nvr) - FLIR DNR300 SERIES Instruction Manual

22

Connecting a PTZ Camera

You can connect PTZ cameras (not included) to the system.
To connect a PTZ camera to the system:
1. Connect the camera video cable to one of the Video IN ports on the system.
2. Right-click and click Main Menu. Enter the system user name (default: admin) and
password (default: 000000) if prompted.
3. Click Setting>Pan/Tilt/Zoom.
4. Under Channel, select the channel your PTZ camera is connected to.
5. Under PTZ Type, select Remote.
6. Click OK. You can now control your PTZ camera using the system.

22.1 Controlling a PTZ Camera (Local NVR)

1. In live view, double-click the channel that has the PTZ camera connected to open in
full-screen.
2. Right-click and click Pan/Tilt/Zoom. Enter the system user name and password if
prompted.
3. Use the on-screen PTZ controls to control the camera.
PTZ Controls
1. Direction keys: Click to pan and tilt the camera.
2. Speed: Enter the PTZ speed.
3. Zoom/Focus/Iris: Click +/- to adjust the zoom, focus, and iris.
4. Set: Click to open the aux menu, where you can set up Presets, Tours, Patterns, and
AutoScans.
5. Page Switch: Click to open advanced PTZ controls.
#; r. 2.0/23094/23094; en-US
143