'
'
O
2
D
1
1
M
U
s
e
r
s
G
u
i
d
O
2
D
1
1
M
U
s
e
r
s
G
u
i
d
2.3.3.
External Connector
Sensor Input (white(+), Red(-))
Relay Output (Black(+), Yellow(-))
Network (LAN)
2.3.4.
Factory Default Switch
Factory default switch is provided for returning the IP camera to factory default state. The factory default
switch can be found by opening the lower body cap of the camera. There are two functions assigned to
factory default switch.
1. Returning to Factory Default State : Press the switch about 5 seconds while power is applied to return
to factory default state.
2. Safe Removal of Micro-SD Card : Press the switch for 1 second to unmount Micro-SD Card for safe
removal.
Video output (CVBS)
Factory Default Switch
Figure 2-4. Factory Default switch and Micro-SD Card slot
e
e
Line Output
Power
Figure 2-3. Connector for external connection
Mic/Line Input
Micro SD Card slot
Rev.1.4 (Oct. 2016)
11