Snmp; Network Alarm - EverFocus EAN Series User Manual

7.3.5 SNMP

The default values for SNMP v1/v2/v2c and SNMP v3 are already filled in. Click either of the
Enable buttons to enable either of the two. Make your changes as desired. Click on the Trap
Address field to enter the digits, if required.

7.3.6 Network Alarm

This function works with EverFocus's CMS software, e.g. PowerVideo Plus. For the setting details,
please refer to the CMS network alarm protocol.
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
37
EAN Series