EverFocus EAN Series User Manual page 58

【Control】The camera features 10x digital zoom. Click the
zoom out the image.
Day: Select Day to set up the following settings for daytime and then click the Apply button to save
the settings.
Night: Select Night to set up the following settings for nighttime and then click the Apply button to
save the settings.
【Camera Settings】
Lens (IRIS Control): Select DC or Manual for IRIS control.
Exposure Settings (AE): This setting is used to adapt to the amount or type of light used by the
camera.
Mode:
ALC (Shutter Priority): Selecting ALC (Automatic Light Control) allows the camera circuitry to

either take bright spots more into consideration (peak), bringing out detail in bright areas,
or less into consideration (average) bringing out detail in shadows.
AES (Iris Priority): Selecting AES (Auto Electronic Shutter) disables the Shutter setting below

this setting. In this mode, the camera measures the light level and decides whether it needs
more or less light and then automatically adjusts the shutter speed accordingly.
Manual: Select this option to manually set up the Shutter (Manual) and AGC (Manual)

values.
Shutter (Manual): If enabled, this setting lets you set the shutter speed yourself (measured in
fractions of a second). This option can be switched on when ALC or Manual Mode is selected.
AGC (Manual): Set the Auto Gain Control limit here. The lower the AGC level, the lower the video
signal and the noise. However, the image will be darker under low-light condition with IR-off if
you set up the Iris to the maximum level. This option can be switched on when Manual Mode is
selected.
Slow Shutter: This option can be switched on when AES Mode is selected in the Exposure
Settings (AE) field.
AGC: Set the Auto Gain Control limit here. The lower the AGC level, the lower the video signal
and the noise. However, the image will be darker under low-light condition with IR-off if you set
up the Iris to the maximum level.
Flickerless: If the Mode field in the Exposure Settings (AE) area has been set to AES, then this
option becomes available. Choose between OFF, 50HZ, 60HZ, 50HZ (High Luminance) or 60HZ
(High Luminance).
EV Setting: Set up the Exposure Value. Note the brightness of the screen changes when you
change the EV value.
AE Response: Set up the Auto Exposure Response time.
52
EAN Series
or button to zoom in or