Snmp; Network Alarm - EverFocus EAN Plus Series User Manual

7.3.5 SNMP

The default values for SNMP v1/v2/v2c and SNMP v3 are already filled in. Click either of the
Enable buttons to enable either of the two. Make your changes as desired. Click on the Trap
Address field to enter the digits, if required.

7.3.6 Network Alarm

This function works with EverFocus's CMS software, e.g. the PowerCon or the Power Video Plus. For
the setting details, please refer to the CMS network alarm protocol.
36
EAN Plus Series