EverFocus EAN Series User Manual page 15

4. Type the user ID and password. Click OK.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.
5. To change the IP settings, double-click the values in the column and type the numbers or select
an option. Click Set IP Address to save the settings.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your network
settings, please consult your network administrators for configuration details.
6. To access the camera, highlight the camera and click Connect to Selected IP. The Internet
Explorer window pops up.
Type the user ID and password to log in. The Live View window of the camera appears.
7.
Note: You might be required to download ActiveX, which is required to view the camera feed.
If asked, click "Yes". For more details on setting up the Microsoft Internet Explorer, please refer
to 5.2 Settings for Microsoft Internet Explorer.
9
EAN Series