EverFocus EAN Series User Manual page 47

Flicker Compensation: Check the box to enable the Flicker Compensation function. Please enable
this function only if flicker artifacts are observed.
Night Mode: Select a camera mode and then click the Apply button to save the settings.
High Contrast: Select High Contrast mode to have images with higher contrast ratio. You can

further configure the camera settings on the Advanced setup page if required. Note that
selecting the Vivid mode will lock (grayed-out) some Camera Settings on the Advanced setup
page such as Exposure Settings (AE), Noise Reduction Settings and Monitor Settings.
Standard: Select Standard mode to have images with system configured settings. You can

further configure the camera settings on the Advanced setup page if required. Note that
selecting the Vivid mode will lock (grayed-out) some Camera Settings on the Advanced setup
page such as Exposure Settings (AE), Noise Reduction Settings and Monitor Settings.
More Detail: Select More Detail mode to enhance the dark parts of the images. You can

further configure the camera settings on the Advanced setup page if required. Note that
selecting the Vivid mode will lock (grayed-out) some Camera Settings on the Advanced setup
page such as Exposure Settings (AE), Noise Reduction Settings and Monitor Settings.
User Define: Select User Define mode to customize the camera settings. You can configure all

the camera settings on the Advanced setup page.
Blur Compensation: Check the box to enable the Blur Compensation function. Please enable this
function only if motion blur is observed.
【Camera Settings】
Mirror: Switch Mirror ON to rotate the image horizontally around a vertical axis.
Flip: Switch Flip ON to rotate the image vertically around a horizontal axis.
BLC: Back Light Compensation (BLC) is used to make the subject appear clearer when it is set against
a bright background.
OFF: Select to switch Back Light Compensation functions off.

ON (BLC): The BLC can increase the exposure of a dark area surrounded by a brighter area,

HLC can decrease the exposure of bright areas surrounded by darker areas. This enables the
camera to better display information that would otherwise have been "whited out", like a
license plate between two bright headlights on a dark road.
ON (HLC): The Highlight-Suppression BLC is used to reduce the brightness of light sources in a

specific area. It is activated only in a low illumination environment to minimize the effects of
glare from bright lights such as spotlights, street lights or headlights in the field of view.
41
EAN Series