Basic Connection - EverFocus EAN Series User Manual

4.5

Basic Connection

1
2
1. Use a standard network cable to connect the camera to the network.
2. Connect the camera to power using one of the following methods:
•
Plugging the supplied power pigtail cable to the 12 VDC port.
•
Using the PoE function and the power will be provided over the network cable.
3. Optionally connect the camera to a speaker or microphone. Note that microphones with
external power supplies are required.
4. Optionally connect the camera to a monitor using a Test-Out cable.
5. Optionally connect the camera to the input / output devices.
After powering the camera, the power LED will be lit in red and you can access the live view and
adjust the image clarity.
Ethernet
Micro SD
(PoE)
DC 12V
Power
Reset
Alarm
7
Audio
In Out
Video Out
5
EAN Series
3
3
4