EverFocus EAN Series User Manual page 59

AE Weighting Area: Select an AE Weighting area. Each setup AE Weighting Area is configured
with the appropriate brightness level on the center and the surrounding areas.
Brightness: Set the image brightness here.
Black Level: Set the Black level here.
BLC Settings: Back Light Compensation (BLC) is used to make the subject appear clearer when it is
set against a bright background.
OFF: Select to switch Back Light Compensation functions off.

Back Light: The Back Light function is useful when the background of the subject is very bright

and the subject itself is dark. Select Back Light and adjust the slide bar to the left / right for
setting up the back light value. The higher the value, the more the backlight compensation.
Front Light: This function is useful when the bright highlights, such as flashlight or car

headlights, appear on the camera view. Select Front Light and adjust the slide bar to the left /
right for setting up the front light value. The higher the value, the more the highlight
compensation.
Noise Reduction Settings: This limits the amount of digital "video noise" that is usually found in any
video stream, and helps to reduce file size. The higher the level, the more the reduction. Select ON
/ OFF to enable / disable the Noise Reduction function. Or select Auto to let the camera
automatically enable / disable the Noise Reduction function. Slide the Level bar to set up the level.
The higher the level, the more the reduction.
White Balance Settings: Select the mode that delivers the best quality image for the camera's light
environment.
Auto: Select to let the camera automatically adjust the White Balance. In the Auto mode the

camera computes the white balance value output using color information from the entire
screen. It outputs the proper value using the color temperature radiating from a black subject
based on a range of value from 3000 to 7500K.
Manual: Select to adjust the Red and Blue values yourself in the fields below this field.

Indoor: Select to use the default settings for indoor environments. In the Indoor mode, the

camera uses 3200K as the base value.
Outdoor: Select to use the default settings for outdoor environment. In the Outdoor mode, it

uses 5800K as the base value.
Manual Temperature: Select to use the optimized Red and Blue settings. You can also

optionally adjust the Manual Level below this field for setting up the color temperature. The
higher the value, the more the color temperature.
53
EAN Series