Related Manuals for EverFocus EMN2120
Summary of Contents for EverFocus EMN2120
- Page 1 EMN Series Mini Mobile IP Dome Camera Full HD, WDR, IP67, IK10, EN50155 User’s Manual Copyright © EverFocus Electronics Corp, Release Date: July, 2013...
- Page 2 Copyright 2013 EverFocus Electronics Corp. All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the EverFocus Electronics Corporation. EverFocus 12F, No.79, Sec. 1, Shin-Tai Wu Road,...
-
Page 3: About This Document
- Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment, not expressly approved by EverFocus or parties authorized by EverFocus could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:... - Page 4 Precautions 1. Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. 2.
-
Page 5: Table Of Contents
Contents Introduction ..........................1 Physical Description ......................... 2 Cables…………..........................2 Dimensions ............................ 3 Packing List ............................ 3 Features ............................. 4 Installation..........................5 Basic Installation ........................... 5 Accessing the User Interface ....................9 Checking the Dynamic IP Address ....................9 Settings for Microsoft Internet Explorer .................. - Page 6 7.2.4 Image ........................... 48 Event Settings ..........................49 7.3.1 Event Wizard ........................ 49 7.3.2 Event ..........................50 7.3.3 Notification ........................54 Link to Smart Phone App ......................57 Upgrading Firmware Using IP Utility ..................58 Specifications .......................... 60 Troubleshooting ........................62...
-
Page 7: Introduction
EMN series mini IP dome conforms to ONVIF / PSIA for compatibility with other network video devices, it interoperates with a wide variety of hardware and software systems. You can also use EverFocus Mobile Applications to remotely view the live views of the cameras through your handheld devices; or use EverFocus CMS to remotely manage multiple IP devices connected on the network. -
Page 8: Physical Description
EMN Series Mini Mobile IP Dome 2. Physical Description No. Item Name Descriptions One built-in microphone. Microphone Micro SD / SDHC Slot For inserting a micro SD / SDHC card. Reset Button Resets all configurations to the factory default settings. Connects to a handheld monitor for adjusting camera angles using Video Test-Out Connector the supplied Video Test-Out Cable. -
Page 9: Dimensions
Note: 1. Equipment configurations and supplied accessories vary by country. Please consult your local EverFocus office or agents for more information. Please also keep the shipping carton for possible future use. 2. Contact the shipper if any items appear to have been damaged in the shipping process. -
Page 10: Features
Endurable to low environment temperatures (-40°C ~ 55°C / -40°F ~ 131°F) 10-36 VDC / PoE Multi-languages on Web interface ONVIF / PSIA compliant Supports EverFocus CMS and Mobile Applications (iOS / Android) * Only EMN2220/2320 models support MPEG4. EMN2120 do not support MPEG4. -
Page 11: Installation
EMN Series Mini Mobile IP Dome Installation Basic Installation Please follow the steps below to mount the camera to the wall / ceiling. Paste the supplied mounting template onto a desired location on the wall / ceiling. Drill the three cross marks and insert the supplied three Anchors into the holes. - Page 12 EMN Series Mini Mobile IP Dome Attach and then screw the camera to the wall / ceiling using the supplied three Long Screws. Thread the cables. a. From the side cut of the camera case: remove the plug from the camera case first. Remove the Plug b.
- Page 13 EMN Series Mini Mobile IP Dome c. Place the Waterproof Ring into the LAN/PoE cable. Connect the RJ-45 cable to the Rugged RJ-45 Connector Cable. RJ-45 Cable Waterproof Ring Rugged RJ-45 Connector Cable d. Tightly screw the Cable Gland and Screw Cap to the Rugged RJ-45 Connector Cable. e.
- Page 14 EMN Series Mini Mobile IP Dome Tilt Adjustment: Loosen the screw and tilt the camera by 90°. 90° Rotational Adjustment: Loosen the screw and rotate the camera by ±90°. ±90° Remove the used desiccant bag from the camera and then stick the supplied Desiccant Bag on the inner side of the cover.
-
Page 15: Accessing The User Interface
EMN Series Mini Mobile IP Dome 5. Accessing the User Interface This section explains how to access the Web interface of the camera for configuration. Checking the Dynamic IP Address You can look up the IP address and access the Web interface of the camera using the IP Utility (IPU) software included in the software CD. - Page 16 EMN Series Mini Mobile IP Dome To change the IP settings, double-click the values in the column and type the numbers or select an option. Click Set IP Address to save the settings. Note: Most networks support DHCP protocol, but if you are unsure of your network protocol, please consult your IP administrator for network configuration details.
-
Page 17: Settings For Microsoft Internet Explorer
EMN Series Mini Mobile IP Dome Settings for Microsoft Internet Explorer To enable Remote Live View, Firmware Upgrade and ActiveX Prompt on Internet Explorer, some settings have to be complete. Please follow the steps below: 1. On the computer, click Start > Control Panel > System and Security > Action Center (click Change User Account Control Settings), the User Account Control Settings window appears. - Page 18 EMN Series Mini Mobile IP Dome 3. In the Download unsigned ActiveX controls field, select Prompt. In the Include local directory path when uploading files to a server field, select Enable. Click OK. 4. In the Internet Options window, click the Advanced tab and then disable Enable memory protection to help mitigate online attacks.
-
Page 19: Connecting The Camera To The Network
EMN Series Mini Mobile IP Dome Connecting the Camera to the Network There are three methods to connect the IP camera to the network: Router or LAN Connection, Direct High-Speed Connection and One-to-One Connection. Router or LAN connection This is the most common connection in which the IP camera is connected to a router and allows multiple users on and off site to see the IP camera on a LAN/WAN (Internet). - Page 20 EMN Series Mini Mobile IP Dome Direct High-Speed Connection In a Direct High-Speed Connection, the camera connects directly to a modem without the need for a router. You need to set the static or dynamic WAN IP address assigned by your ISP (Internet Service Provider) in the camera’s configuration web pages.
-
Page 21: Live View Window
SD / SDHC card slot on the camera. See 6.2 Setting up the Playback Function). 3. Snapshot Click the Snapshot button to take a snapshot. By default, the snapshot will be saved at C:\EverFocus\. To change the location, see Record to Local in 7.1.3 Storage. - Page 22 EMN Series Mini Mobile IP Dome 6. Click the Setting button to enter the Settings page (see 7. Settings). 7. Click the Wizard button to enter the Setup Wizard. 8. Hallway Display (9:16): Click the Rotate button to rotate the live image. This function allows users to monitor vertically-oriented areas such as hallway, corridors and aisles.
- Page 23 EMN Series Mini Mobile IP Dome 13. One Push The One Push button can be displayed on the live view window by enabling the Show One Push Buttons function in the Live View Layout Settings (see 7.1.4 Display and Overlay). For the button to work, select One Push from the White Balance Mode drop-down list (see 7.2.4 Image.
-
Page 24: Playback
EMN Series Mini Mobile IP Dome 6. Playback You can remotely play back the recordings stored in the on-camera micro SD card on the Web interface, or play back the recordings stored in the computer using the ARV Viewer included in the software CD. Playback is designed as a quick way to check recent recordings that were triggered by Events that were configured to “Record to SD Card”... - Page 25 EMN Series Mini Mobile IP Dome Search by File: Click the Search button to search for all recording files on the on-camera SD card. Search results will be displayed in the Filename area. Search by Time: Click the Date / Time column and select the date and time from which you want to search until the present moment.
-
Page 26: Setting Up The Playback Function
EMN Series Mini Mobile IP Dome Setting Up the Playback Function Note that the Playback function will not be activated until the user has inserted a micro SD card in the camera’s micro SD card slot. The card may also have to be formatted in the Secure Digital Card field (see 7.1.3 Storage). -
Page 27: Testing The Playback Function
EMN Series Mini Mobile IP Dome 6.2.2 Testing the Playback Function 1. To test the Playback function (this is not required), set up a “Manual Trigger” Recording Event by clicking Event Settings > Event. 2. Give the event a name, like “Test 1”. 3. - Page 28 EMN Series Mini Mobile IP Dome 9. Click the Trigger Event button and slowly count down on your fingers in front of the lens (if you are able to do so – if not, try to find visual cues on the view screen that will help you to mark the moment you pushed the trigger).
-
Page 29: Playing Back Using Arv Viewer
EMN Series Mini Mobile IP Dome Playing Back Using ARV Viewer You can play back the recordings stored in the computer using the ARV Viewer included in the software CD. To store the recordings in the computer, please refer to Copy in 6.1 Remote Playback using Playback Page. -
Page 30: Settings
EMN Series Mini Mobile IP Dome 7. Settings Click the Setting button on the Live View Window to enter the setting submenu. There are two tabs: Basic and Advanced on the left-side bar. You can set up the basic camera settings in the Basic tab. To further set up comprehensive camera settings, click the Advanced tab, which includes all the settings to be configured. -
Page 31: System Settings
EMN Series Mini Mobile IP Dome System Settings 7.1.1 Network... - Page 32 RTP over HTTP: The RTSP protocol uses HTTP for camera data stream transmission. Nevio CGI: This is EverFocus’ protocol designed for EverFocus’ IP devices. Select this protocol for camera data stream transmission. 【IP Settings】Enter the IPv4 / IPv6 details in this area, which applies to your system. Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
- Page 33 From EverFocus: If you choose the EverFocus DDNS server, you can obtain a free host name from EverFocus. To obtain a free host name from EverFocus, type a desired host name in the textbox, click the Register / Update button, and then click the Apply button.
- Page 34 2. In certain router models, it is possible that you will not be able to access the camera using DDNS while inside the router’s network. Please try using a PC located outside of your router’s network. Default Ports on All EverFocus IP Cameras: HTTP: 80 RTSP: 554 HTTPS: 443 【HTTPS Settings】This function can only be set up in the Advanced tab.
- Page 35 EMN Series Mini Mobile IP Dome 2. Click the Apply button. The subject line will be displayed in the Install Certificated Info field. 3. Click the Property button, a pop-up window appears to display the details of the certificate. 4. To optionally create and install other certificates, remove the existing one by clicking the Remove button to erase the certificate.
- Page 36 EMN Series Mini Mobile IP Dome 2. Type the required Certificate information and then click the Apply button. The subject line will be displayed in the Created Request field 3. Click the Property button, a pop-up window appears to display the details of the certificate. 4.
-
Page 37: Date / Time
EMN Series Mini Mobile IP Dome 7.1.2 Date / Time You can set up the system’s time on this page. 【Date/Time Format Settings】Select the desired Date / Time format and then click the Apply button. 【Date/Time Settings】 Manual: Set the date/time if you won’t be using an NTP server to update the date/time. Click ... -
Page 38: Storage
EMN Series Mini Mobile IP Dome 7.1.3 Storage You can configure the recording path / format, source video stream and SD card settings on this page. 【Record to Local】This function can only be set up in the Advanced tab. You can configure the storage path for storing the recordings / snapshot on your PC. - Page 39 EMN Series Mini Mobile IP Dome Event Recording: Select the location where you want the camera to send the impending storage shortage text notification to. FTP Back Up Only: Select to send the impending storage shortage text notification to the FTP •...
-
Page 40: Display And Overlay
EMN Series Mini Mobile IP Dome 7.1.4 Display and Overlay You can configure the recording path / format, source video stream and SD card settings on this page. 【Overlay Text Settings】Check the boxes to display the information on the Live View Page. To change the foreground color of the text, directly click on the box and then select a color. -
Page 41: System Maintenance
EMN Series Mini Mobile IP Dome 7.1.5 System Maintenance You can configure the recording path / format, source video stream and SD card settings on this page. 【Machine Name】C If required, enter a new name for the machine. This name will be visible in the Machine Name field of the IP Utility software, which is included in the software CD. - Page 42 EMN Series Mini Mobile IP Dome 【Language Settings】Select the language to be displayed on the Web interface of the IP camera. The default language is English. To add a new language not listed in the current Language list, click the Browse button to locate the new language file (.evb) on your computer and then click the Upload button.
- Page 43 EMN Series Mini Mobile IP Dome 【Upgrade Firmware】This function can only be set up in the Advanced tab. Click the Browse button to find a previously prepared firmware upgrade file. Click the Upload button to install the new firmware. Note: 1.
-
Page 44: System Information
EMN Series Mini Mobile IP Dome 7.1.6 System Information You can see the system information and log information displayed on this page. 【System Status】Displayed the system information. The values cannot be changed on this page. The Uptime represents the period since the camera has been powered on. For example, up 1 day 2:36 represents the camera has been powered on for one day, 2 hours and 36 minutes. -
Page 45: User
EMN Series Mini Mobile IP Dome 7.1.7 User The system administrator can create up to ten user accounts on this page. 【User Management】The system has automatically created ten user accounts. To set up an user account: 1. Highlight a user account and its information will be displayed in the field below the account list. 2. - Page 46 EMN Series Mini Mobile IP Dome User: A user can not only view the live view but also view/configure the below camera settings. • View Configure System Settings Network Network > Protocol Settings Date/Time Date/Time > Date/Time Format Settings Storage > Record to Local Storage >...
-
Page 47: Black/White List
EMN Series Mini Mobile IP Dome 7.1.8 Black/White List Use this page to specify IP addresses that are allowed / denied to access this camera. By default, any IP address can access the camera. Note: The Allowed IP addresses only become relevant when the Denied items contain a Network or Range, and the supervisor wants to allow one or more IP addresses within that excluded range or network. -
Page 48: Camera Settings
EMN Series Mini Mobile IP Dome Camera Settings You can configure camera related settings, such as video / audio, region of interest and privacy mask. 7.2.1 Streaming and Audio... - Page 49 EMN Series Mini Mobile IP Dome 【Stream Settings】This IP camera can output three video streams simultaneously. For each of these streams, the user can set the compression format, resolution, bit rate, and frame rate individually. Stream 1 is always enabled for live view. To enable Stream 2, Stream3 and/or Stream 4, check the Enable Stream 2 / Enable Stream 3 / Enable Stream 4 box.
- Page 50 EMN Series Mini Mobile IP Dome 【Privacy Mask Settings】This function can only be set up in the Advanced tab. The Privacy Mask can block out sensitive areas from view, covering the areas with colored or black and white boxes in both live view and recorded clips.
-
Page 51: Camera
EMN Series Mini Mobile IP Dome 7.2.2 Camera 【Day/Night Settings】 Mode: Select a mode from the drop-down list. Auto: Select to let the camera automatically switch to Night mode (black and white images) • when the light levels fall to a specified level, and back to Day mode (color images) when the light levels rise to a specified level. - Page 52 EMN Series Mini Mobile IP Dome Day Profile/ Night Profile: Select Day Profile to configure the following settings for daytime and select Night Profile to configure the following settings for nighttime. Click the Apply button to save the settings. 【Exposure Settings】 This function can only be set up in the Advanced tab. This setting is used to adapt to the amount or type of light used by the camera.
-
Page 53: Schedule
EMN Series Mini Mobile IP Dome 7.2.3 Schedule The Schedule setup page is designed for users to configure the daytime and nighttime of each day. The Schedule setting is only functional if you select Schedule from the D/N Mode drop-down list on the Camera setup page. -
Page 54: Image
EMN Series Mini Mobile IP Dome 7.2.4 Image This function can only be set up in the Advanced tab. 【Orientation Settings】 Enable Mirror: Check the box to enable the mirror function. The image will be rotated horizontally around a vertical axis. Enable Flip: Check the box to enable the flip function. -
Page 55: Event Settings
EMN Series Mini Mobile IP Dome Event Settings You can set up the Motion Detection event or Tampering Detection event to automatically notify the users when an event occurs. You can also set up a schedule to automatically record the videos when an event occurs. -
Page 56: Event
EMN Series Mini Mobile IP Dome 7.3.2 Event This function can only be set up in the Advanced tab. Except the Event Wizard, you can also configure the event settings along with the Recording Schedule on this page. - Page 57 EMN Series Mini Mobile IP Dome 【Event Management】You can set up the events such as Motion Detection or Tampering Detection to automatically notify the users when an event occurs. Event Name: Type an event name. Event Trigger Type: Select an event for the to-be-specified-below reaction/s. ...
- Page 58 EMN Series Mini Mobile IP Dome Network Alarm: Check the box if you want the camera to send a network alarm signal (when the event occurs) to the CMS servers. Note that you have to configure the Network Alarm Settings for this function to work (see 7.3.3 Notification).
- Page 59 EMN Series Mini Mobile IP Dome 【Motion Settings】 Use this page to configure up to four areas in which motion will be detected. When a motion is detected by the camera, the motion detection icon will appear at the top right corner on the Live page to alert the user.
-
Page 60: Notification
EMN Series Mini Mobile IP Dome 7.3.3 Notification This function can only be set up in the Advanced tab. - Page 61 EMN Series Mini Mobile IP Dome 【SMTP (Email) Settings】This area is for configuring the mail server that is used to send e-mail text notifications and one image file from the camera to predefined addresses via SMTP. Note that to enable e-mail notification function, you have to check the Send Mail Notification box in the Event Management field (see 7.3.2 Event).
- Page 62 Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings. 【Network Alarm Settings】This function works with EverFocus CMS software. The camera can send a network alarm signal (when the event occurs) to the CMS servers. To establish the connection between the camera and CMS servers, the protocol and port number should match with each other.
-
Page 63: Link To Smart Phone App
EMN Series Mini Mobile IP Dome Link to Smart Phone App You can access camera live view or take a snapshot via your smart phone. This page is designed for users to download the mobile app to your mobile phone by scanning the QR code. MobileFocus MobileFocusPlus MobileFocus... -
Page 64: Upgrading Firmware Using Ip Utility
EMN Series Mini Mobile IP Dome 8. Upgrading Firmware Using IP Utility You can upgrade the Firmware using the IP Utility software included in the software CD. Install and then start the IP Utility . The following dialog box appears. IPU will automatically search the cameras connected in the LAN. - Page 65 EMN Series Mini Mobile IP Dome Select the camera and then click Upgrade Firmware. A browsing window appears. Select the firmware file (.evb) and then click Open. The IP Utility will automatically upgrade the firmware. The camera will reboot once the update is complete. Click Find Devices, the new firmware version should be displayed in the last part of the Machine Name.
-
Page 66: Specifications
EMN Series Mini Mobile IP Dome 9. Specifications EMN2220 Model EMN2120 EMN2320 System Information Multimedia SoC (System-on-Chip) Flash 32 MB 512 MB Camera 1/2.7" Progressive 1/2.7" Progressive Image Sensor 1/3” Progressive CMOS Megapixel 1.3 MP 2 MP 3 MP Max. Resolution... - Page 67 EMN Series Mini Mobile IP Dome Frame Rate 30 fps at 1280 x 1024 30 fps at 1920 x 1080 15 fps at 2048 x 1536 S/N Ratio Above 48dB Audio Audio Capability Audio input Audio Compression G.711, GSM-AMR, AAC Internal microphone Interface line-in (only for cameras with Rugged Type cable)
-
Page 68: Troubleshooting
EMN Series Mini Mobile IP Dome 10. Troubleshooting Error messages pop up When these error messages pop up, follow the steps below to fix the problem. 1. To enter the Registry Editor of your computer: Click Start and type “regedit” in the Search Program and Files field. - Page 69 EMN Series Mini Mobile IP Dome 3. Find the KeepAlive Timeout Dword by following the path: \HKEY_CURRENT_USER\Sofware\Microsoft\Windows\CurrentVersion\Internet Settings 4. Double-click KeepAlive Timeout and this window appears. 5. Change the Value data to 480000 and click OK.
- Page 70 EverFocus USA - California: EverFocus USA - New York: 1801 Highland Avenue, Unit A, Duarte, CA 91010, USA 415 Oser Avenue, Unit S, Hauppauge, NY 11788, USA TEL: +1 626 844 8888 TEL: +1 631 436 5070...