EverFocus EAN Series User Manual page 38

Password: Input the user's login password if the SMTP server requires authentication.
Receiver Address: Input the e-mail addresses for receiving an e-mail message when an EVENT is
enabled and triggered. Please use ";" to separate multiple addresses.
Sender Address: Input the sender's e-mail address, so that the receiver can recognize the sender
when an Event message is received.
Attach Image: Check this box if you want to attach an image when an alarm is triggered or an IP
camera detects events.
This server requires a secure connection (SSL): Check this box to enable the SSL function. Enable
this function means you can access the camera through the SSL protocol that provides
communication security over the Intern
Send Test Email: Click the Test button to send a testing email to the assigned address.
Click Apply to apply the setting changes or Cancel to cancel the changes and return to the
previous settings.
【Set FTP Server】The settings relating to the FTP server used to transmit the alarm recordings can
be configured here. Note that to enable uploading recordings to the FTP server function, you have
to check the Upload to FTP item on the Event dialog box (see 7.7.1 Event Settings).
FTP Server: Enter the IP address or the host name of the FTP server.
FTP Port: Enter the port number for the FTP server. Default is 21.
Recording Path: Assign the recording path.
User Name: Set FTP User's name.
Password: Set FTP password.
32
EAN Series