4. Basic Connection
1
2
1.
Use a standard network cable to connect the camera to the network.
2.
Connect the camera to power using one of the following methods:
•
Plugging the supplied power pigtail cable to the DC 12V port.
•
Using the PoE function and the power will be provided over the network cable.
3.
Optionally connect the camera to a speaker and microphone. Note that microphones with
external power supplies are required.
4.
Optionally connect the camera to a monitor using a BNC cable.
5.
Optionally connect the camera to the input / output devices.
After powering the camera, the power LED will be lit in red and you can access the live view and
adjust the image clarity.
Audio
Ethernet
Micro SD
In
(PoE)
Video Out
DC 12V
Power
Reset
Alarm
5
Out
4
5
EAN Plus Series
3
3