Ordering Spare Parts - ESAB Origo M13y YardFeed 200 Instruction Manual

GB
Welding gun
S
The welding gun's wear parts should be cleaned and replaced at regular
intervals in order to achieve trouble-free wire feed. Blow the wire guide clean
regularly and clean the contact tip.
7

ORDERING SPARE PARTS

YardFeed 200 is designed and tested in accordance with the international and Europe­
an standards EN 60974-5 and EN 60974-10. It is the obligation of the service unit
which has carried out the service or repair work to make sure that the product still
conforms to the said standard.
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.
bm47d1ea
- 13 -
© ESAB AB 2005