Magnetic Card Reading - Casio QT-6600 Reference Manual

2-15.

Magnetic card reading

• In case of setting "Swipe has precedence." (D
1. Customer number entry
2. Create dummy check
3. Clerk sign on
4. Enter REG 2 mode
• In case of setting "Swipe has NOT precedence." (D
5. Loyalty card
QT-6600 Reference Manual
QT-6600 has the following capability by swiping magnetic card.
You can enter customer number, by swiping magnetic card.
→
<CUST-#> key Card swipe
• Customer number should be programmed in the customer file.
• Site No. in the mag stripe equals to the programmed value.
• Use Track-1
Card swiping activates table transfer.
• Read the customer name from the magnetic card and store it to the check index memory.
• In case of using this feature, program "transfer table by card swiping" (D
address 26 of the general control program)
• Use Track-1
Card swiping activates clerk sign on. (effective during signing off only)
• In case of using this feature, the lower 4 digit in the mag stripe should be set to the clerk
number.
• Use Track-2 (If track-2 cannot read, use track-1.)
Cashier/ clerk can enter the REG 2 mode, by swiping card.
→
<MODE> key <2> <REG MODE> key
• In case of using this feature, the lower 4 digit in the mag stripe is treated as secret
number.
• Use Track-2 (If track-2 cannot read, use track-1.)
This function is used to register the key strings such as customer discount etc., by swiping
magnetic card (and scanning OBR code). After swiping a card (track-2)/ scanning a code, the
designated function in the transaction key file is executed.
Procedure
• Using swiping:
→
(<SWIPE> key) Card swipe
• Using scanning:
→
<SWIPE> key Card scanning
After swiping/ scanning card, the following subjects are performed.
1. Check card expiry (In case of programming check to <SWIPE> key.)
2. Card data check (Checked by D
<SWIPE> key.
3. Transfer card data (D and D
7
4. Activate function (D ~ D
5
of the address 24 of the general control program)
1
→
of the address 24 of the general control program)
1
Pressing <SWIPE> key is ommissible.
<SWIPE> key should be allocated in the transaction key file.
If there is no <SWIPE> key on the keyboard, program D
of the address 24 of the genreral control program to designate the
default <SWIPE> key.
Pressing <SWIPE> key is mandatory.
~ D of <SWIPE> key program and unit price field of
10 8
of <SWIPE> key program)
6
of <SWIPE> key program)
1
10
Card swipe
of the
and D
7 6
R-87