Customer - Casio QT-6600 Reference Manual

Registration
4-17.

Customer

Item registration
REG C01
1 PLU0001
1 PLU0002
1 PLU0003
DISC
TBL TRANS
TBL TRANS
Payment (by <DEPOSIT> key)
REG C01
1 PLU0001
1 PLU0002
1 PLU0003
DEPOSTT
DISC
TBL TRANS
TBL TRANS
Payment (by <PAYMENT> key)
REG C01
CUST0001
1 PLU0001
1 PLU0002
1 PLU0003
DISC
---------------------------------------
TL
CASH
CG
CG
Note:
R-152
Before using the customer function, the following programs are necessary to use this
function.
1) Allocating customer file (File-037), customer group file (File-042)
Check index file and check detail file are also necessary.
2) Allocating customer ID number key (148), payment key (149), table transfer key (014),
deposit key (025): if necessary.
3) Program "Customer Control", and "Customer Group", refer to the page 69 of the
programming manual.
3) Program customer No., name, title, address, etc to the customer file, refer to the page 101
of the reference manual.
10-10-01 12:34 000001
•1.00
•2.00
•3.00
-0.60
•5.40
1
10-10-01 12:34 000001
•1.00
•2.00
•3.00
-5.00
-0.10
•0.90
1
10-10-01 12:34 000001
1CT
•1.00
•2.00
•3.00
-0.60
•0.90
•6.00
•0.60
•0.60
Pressing the <CUST#> directly shows customer No. and name window to specify the
customer. Also you can enter a new customer data here in case of allowing to create a new

customer.

1. Enter customer No. and press the <CUST# > (customer ID
No.) key.
2. Perform item registration.
(You can re-enter the customer ID No.)
<PLU0001>
<PLU0002>
<PLU0003>
3. Press the <TABLE TRANSFER> key to finalize the transac-
tion.
1. Enter customer No. and press the <CUST#> (customer ID
No.) key.
2. Perform item registration.
3. Enter tendered amount and press the <DEPOSIT-> key.
4. Press the <TABLE TRANSFER> key to finalize the transac-
tion.
1. Press the <PAYMENT> key.
2. Enter customer No. and press the <CUST#> (customer ID
No.) key.
3. Perform a finalize operation.