Mode Control; Operation Prompt And Error Messages; Printing Control System - Casio QT-6600 Reference Manual

Application System

2-1-5. Mode control

2-1-6. Operation prompt and error messages

2-1-6-1. Operation prompt
2-1-6-2. Error messages

2-1-7. Printing control system

2-1-7-1. Receipt print control during normal registration
R-26
With the QT-6600, each clerk can be programmed to enable or disable operations in the
following modes:
– REF mode
– REG– mode
– REG mode
– X/Z mode
– Program 1 ~ 6 mode
– Manager mode
– Inline X/Z mode
– Inline auto program
– CF backup / restore mode
Also, each clerk can be programmed to enable or disable operations of every function key.
Though the terminal has no actual REG 2 mode, on the page 49 in the Clerk Control
function chapter of this manual, the manager control procedure is described.
Arrangement execution mode programmed in the arrangement key ignores the mode
control program by the clerk.
Please note that if a clerk want to operate an arrangement, he / she should allow to operate
arrangement function.
The QT-6600 displays messages to indicate the status of the terminal being operated or
programmed. These messages help to determine the status of the terminal or the required
subsequent action.
Refer to the page 227 of this manual for details. These messages cannot be added, modified
or deleted.
Refer to the page 224 ~ 227 of this manual for details. Error messages are displayed to
indicate that an error has occurred and a compulsory operation must be performed. All error
messages cannot be added, modified or deleted.
The following describes the control system for printing of receipts, the journal, validation,
slips and X/Z reports.
Normally, the receipt is printed to reflect the details of a registration as it is performed, with
the receipt being issued with the finalize operation. By using the <RECEIPT ON/OFF>
key, the receipt issuance status can be turned off to suspend printing and issuance of
receipts when so desired. Pressing the <RECEIPT ON/OFF> key turns the receipt
issuance status on or off, and when the receipt issuance status is On, the icon "RECEIPT
ON" appears.
The following programming can be performed for receipt printing: