3-Way Conference; Voicemail - TIPTEL IP-280 Manual

Hide thumbs Also See for IP-280:
Table of Contents

Advertisement

Enterprise IP Phone
4) If C refused to answer the call, it will prompt A that the transfer operation is failed.
If the current mode is speaker, it will ring up; if the current mode is handset or
headset, it will play ring tones for every five seconds. Pressing any function keys to
exit the prompt interface. This function should be supported by server.
To Attended Transfer via phone interface:
1) A and B is on an conversation, A press TRAN Button to put B on hold, then A can dial
the third telephone number C and press the OK or SEND button to call out.
2) After C answered it, A and C can have a private conversation without B hearing it,
then A press the TRAN button to complete the transfer.
3) A will be disconnected from the call. B can talk to C.
To Semi-Attend Transfer via phone interface:
1) A and B is on an conversation, A press the TRAN button to put B on hold, then A can
dial a new number C and press the OK or SEND button to call out.
2) While C is ringing, A hang up or press the TRAN button. Then A will turn to hold
status, and the LCD will display as Transferred.
3) You will be disconnected from the call, when C pick up, B can talk to C.
Note:
Make sure that the SIP server you have registered supports this function.

3-way Conference

You can establish a three-party conference, during the conversation three phone
parties can communicate with each other.
To establish a conference:
1) Press the CONF button during an active call.
2) The first call is placed on hold. You will hear a dial tone. Dial the number to
conference in, then press the SEND key.
3) Press the MENU key to stop the conference in operation before the call is answered.
4) After the call is answered, the conference call will now include you and the other
two parties.
5) Hang up to disconnect all parties.

Voicemail

Your voice mailbox messages, which are usually stored on a media server of your local
or hosted VoIP telephony system, can be accessed from your phone.
New voice messages can be indicated both acoustically and visually as described below:
The idle screen will indicate the new voice messages coming:
Using the Basic Phone Functions
- 31 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yealink sip-t20p

Table of Contents