Conference; Forward; Transfer; Hold - TIPTEL IP-280 Manual

Enterprise IP Phone
other party hung up, your phone will turn to the idle status.

Conference

You are allowed to configure the DSS key to be used as a conference key while
remaining in the current call. This key allows a user on a call to conference another
party at a pre-defined number while remaining in the conference.
To assign the key as Conference:
1) Choose Phone->DSS Key->Line Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose KeyEvent from the
list, then in the Mode field, open the pull-down menu and choose Conference.
2) Press Confirm button to save the changes.

Forward

If the key is configured as Forward key, press this key under the idle status, the IP
phone will turn to the Always Forward page and you can set the Forward to number,
then when there is any call to the extension number will be forwarded to the set number
automatically.
To assign the key as Forward:
1) Choose Phone->DSS Key->Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose KeyEvent from the
list, then in the Mode field, open the pull-down menu and choose Forward from the
list.
2) Enter the extension number you want to forward to in the Extension field.
3) Press Confirm button to save the changes.

Transfer

You are able to configure the keys to perform the Blind/Attended Transfer function.
To assign the key as Transfer:
1) Choose Phone->DSS Key->Line Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose KeyEvent from the
list, then in the Mode field, open the pull-down menu and choose Transfer from the
list.
2) Press Confirm button to save the changes.

Hold

The key can be configured as a hold key. You can use this key to hold and retrieve a call
during the conversation.
To assign the key as Hold:
1) Choose Phone->DSS Key->Line Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose KeyEvent from the
Using the Advanced Phone Functions
- 45 -