Disk Boot Failure; Diskette Drives Or Types Mismatch Error; Error Encountered Initializing Hard Drive; Error Initializing Hard Disk Controller - Korenix JetBox 8180 User Manual

6-1-4 DISK BOOT FAILURE

When you can't find the boot device, insert a system disk into Drive A and press <
Enter >. Make sure both the controller and cables are all in proper positions, and also
make sure the disk is formatted. Then reboot the system.
6-1-5 DISKETTE DRIVES OR TYPES MISMATCH
ERROR
When the diskette drive type is different from CMOS, please run setup or configure
the drive again.
6-1-6 ERROR ENCOUNTERED INITIALIZING HARD
DRIVE
When you can't initializes the hard drive, ensure the following things:
1. The adapter is installed correctly
2. All cables are correctly and firmly attached
3. The correct hard drive type is selected in BIOS Setup
6-1-7 ERROR INITIALIZING HARD DISK
CONTROLLER
When this error occurs, ensure the following things:
1. The cord is exactly installed in the bus.
2. The correct hard drive type is selected in BIOS Setup
56 Technical Reference | Korenix