Table of Contents
Advertisement
To set the password, please complete the following steps.
1.
Select Change Supervisor Password.
2.
Type the desired password (up to 6 character length) when you see the message,
"Enter New Supervisor Password."
3.
Then you can go on to set a user password (up to 6 character length) if required.
Note 6: that you cannot configure the User password until the Supervisor
password is set up.
4.
Enter Advanced BIOS Features screen and point to the Security Option field.
5.
Select System or Setup.
i. Always: a visitor who attempts to enter BIOS or operating system will be
prompted for password.
ii. Setup: a visitor who attempts to the operating system will be prompted for user
password. You can enter either User password or Supervisor password.
6.
Point to Save Settings and Exit and press Enter.
7.
Press Y when you see the message, "Save Current Settings and Exit (Y/N)?"
40
BIOS | Korenix
Advertisement
Table of Contents
