Dram Frequency; Configure Dram Timing By Spd - Korenix JetBox 8180 User Manual

4-6-2 DRAM Frequency

This specifies the SDRAM memory clock frequency.
Available Options: Auto, 400MHz, and 533MHz
Default setting: Auto

4-6-3 Configure DRAM Timing by SPD

SPD represents Serial Presence Detect. It is an 8-bit, 2048 bits EEPROM, built on the
SDRAM for 100 MHz frequencies. If the installed SDRAM supports SPD function,
select SPD. If not, you can select based on other access time of the SDRAM.
Available Options: Disabled and Enabled
Default setting: Enabled
Korenix | BIOS 43