Lan Utility & Driver; Watchdog Timer - Korenix JetBox 8180 User Manual

Hide thumbs Also See for JetBox 8180:
Table of Contents

Advertisement

System must be restart then complete the installation.
5-4
LAN Utility & Driver
Step 1: To install the LAN driver, insert the CD ROM into the CD ROM device, and
enter DRIVER>LAN>RTL8111C. If your system is not equipped with a CD
ROM device, copy the LAN driver from the CD ROM to CF.
Step 2: Execute setup.exe file.
5-5

Watchdog Timer

This section describes how to use the Watchdog Timer, including disabled, enabled,
and trigger functions.
The JetBox is equipped with a programmable time-out period watchdog timer. You
can use your own program to Enabled the watchdog timer. Once you have enabled
the watchdog timer, the program should trigger the I/O every time before the timer
times out. If your program fails to trigger or disable this timer before it times out, e.g.
because of a system hang-up, it will generate a reset signal to reset the system. The
time-out period can be programmed to be set from 1 to 255 seconds or minutes.
Watchdog Timer Setting
The watchdog timer is a circuit that may be used from your program software to
detect system crashes or hang-ups. The watchdog timer is automatically disabled
48
Software Installation | Korenix

Advertisement

Table of Contents
loading

Table of Contents