Table of Contents
Advertisement
APM Configuration
USB Configuration
3. PCIPnP
4. Boot
Boot Settings Configuration
Boot Device Priority
Hard Disk Drives
CD/DVD Drivers
5. Security
Change Supervisor Password
Change User Password
Clear User Password
Boot Sector Virus Protection
6. Chipset
NorthBridge Configuration
SouthBridge Configuration
7. Exit
Save Changes and Exit: Exit system setup after saving the
changes.F10 key can be used for this operation.
Discard Changes and Exit: Exit system setup without saving any
changes. ESC key can be used for this operation.
Discard Changes: Discard changes down so far any of the set
questions. F7 key can be used this operation.
Load Optimized Default: to auto configure the system according to
optimal setting with pre-defined values. This is also the factory
default setting of the system when you receive the board.
Load Fail-Safe Default: to configure the system in fail-safe mode with
predefined values.
Keyboard Convention
On the BIOS, the following keys can be used to operate and manage the menu:
Item
ESC
Page Up/Page Down
20
BIOS | Korenix
Function
To exit the current menu or message
To select a parameter
Advertisement
Table of Contents
