Pci Latency Timer; Pci Ide Busmaster; Irq 3 -15; Boot Setup - Korenix JetBox 8180 User Manual

4-3-3 PCI Latency Timer

This field specifies the latency timings (in PCI clock) PCI devices installed in the PCI
expansion bus.
Available Options: 32, 64, 96, 128, 160,192, 224, and 248
Default setting: 64

4-3-4 PCI IDE BusMaster

This option is to specify that the IDE controller on the PCI local bus have
bus-mastering capability.
Available Options: Enabled, Disabled
Default setting: Disabled
4-3-5 IRQ 3 –15
When I/O resources are controlled manually, you can assign each system interrupt as
one of the following types, based on the type of device using the interrupt:
Available: Specified IRQ is available to the used by PCI/PnP devices.
Reserved: Specified IRQ is reserved for used by Legacy ISA devices.
Available Options: Available and Reserved
Default setting: Available
4-4

Boot Setup

Select the Boot tab from the setup screen to enter the Boot BIOS Setup screen. You
can select any of the items in the left frame of the screen, such as Boot Device
Priority, to go to the sub menu for that item. You can display a Boot BIOS Setup
option by highlighting it using the <Arrow> keys. All Boot Setup options are described
in this section. Select an item on the Boot Setup screen to access the sub menu for:
• Boot Setting Configuration
• Boot Device Priority
• Hard disk drives
• Removable Drivers
Korenix | BIOS 33